btanex.blogg.se

Huawei e303 mobile partner
Huawei e303 mobile partner








The computer identifies the new hardware and starts its installation automatically. Insert the USB Stick into one of your computer's USB ports.

huawei e303 mobile partner

The following sections are based on Windows XP. The procedure for installing the management program depends on your computer's operating system. Otherwise, the card as well as your USB Stick may get damaged and the data stored on the card may be corrupted. Do not remove the microSD or SIM/USIM card when the card is in use.Ensure that the beveled edge of the SIM/USIM card is properly aligned with that of the SIM/USIM card slot and the microSD card is inserted according to the direction as labeled on the microSD card slot.If it is not provided in the package, you can buy one yourself. The microSD card is an optional accessory.Replace the front cover and slide it into place.Insert the SIM/USIM card and the microSD card into the corresponding card slots, as shown in the following figure.Slide the front cover to remove it from the USB Stick.It holds a Subscriber Identity Module (SIM)/Universal Subscriber Identity Module (USIM) card. Cyan, solid: The USB Stick is connected to a 3G+ network.Blue, solid: The USB Stick is connected to a 3G network.Green, solid: The USB Stick is connected to a 2G network.Blue, blinking once every 3s: The USB Stick is registering with a 3G/3G+ network.

huawei e303 mobile partner

  • Green, blinking once every 3s: The USB Stick is registering with a 2G network.
  • Green, blinking twice every 3s: The USB Stick is powered on.
  • It indicates the status of the USB Stick. You can tie the cap and the USB Stick together by threading a strap through the strap holes, so that the cap will not be easily lost.

    huawei e303 mobile partner

    The following figure shows the appearance of the USB Stick.










    Huawei e303 mobile partner